SSlogan

All the article from this Blog are published by taken reference from Web Sites/Blog & some of self written.
These are just for educational purpose and not intended to do hurt anyone or for illegal purposes.

RSA, The Security Division of EMC, releases Patch 7 for RSA enVision(r) 4.0 Service Pack 4.

12:22 AM

RSA, The Security Division of EMC, releases Patch 7 for RSA enVision® 4.0 Service Pack 4.

Note
Updated April 17, 2012

Description:
This RSA enVision patch provides a roll-up of hot fixes. Please read the release notes for more information. https://knowledge.rsasecurity.com.

Platforms:
This patch can be installed on RSA enVision 4.0 SP4.

Recommendation:
RSA, The Security Division of EMC strongly recommends installing these patches for RSA enVision 4.0.

Downloading the Patches:
To download RSA enVision 4.0 SP4 patches, please log on to RSA SecurCare Online at https://knowledge.rsasecurity.com and navigate to the RSA enVision product page.

Obtaining Downloads:
To obtain the latest RSA product downloads, log on to RSA SecurCare Online at https://knowledge.rsasecurity.com and click Products in the top navigation menu. Select the specific product whose download you want to obtain. Scroll to the section for the product download that you want and click on the link.

Obtaining Documentation:
To obtain RSA documentation, log on to RSA SecurCare Online at https://knowledge.rsasecurity.com and click Products in the top navigation menu. Select the specific product whose documentation you want to obtain. Scroll to the section for the product version that you want and click the set link.

Obtaining More Information:
For more information about RSA enVision, visit the RSA web site at http://www.rsa.com/node.aspx?id=3170.

Getting Support and Service:
For customers with current maintenance contracts, contact your local RSA Customer Support center with any additional questions regarding this RSA SecurCare Note. For contact telephone numbers or e-mail addresses, log on to RSA SecurCare Online at https://knowledge.rsasecurity.com, click Help & Contact, and then click the Contact Us - Phone tab or the Contact Us - Email tab.

General Customer Support Information:
http://www.rsa.com/node.aspx?id=1264

RSA SecurCare Online:
https://knowledge.rsasecurity.com

EOPS Policy:
RSA has a defined End of Primary Support policy associated with all major versions. Please refer to the link below for additional details.
http://www.rsa.com/node.aspx?id=2575


About RSA SecurCare Notes & Security Advisories Subscription
RSA SecurCare Notes & Security Advisories are targeted e-mail messages that RSA sends you based on the RSA product family you currently use. If you’d like to stop receiving RSA SecurCare Notes & Security Advisories, or if you’d like to change which RSA product family Notes & Security Advisories you currently receive, log on to RSA SecurCare Online at https://knowledge.rsasecurity.com/scolcms/help.aspx?_v=view3. Following the instructions on the page, remove the check mark next to the RSA product family whose Notes & Security Advisories you no longer want to receive. Click the Submit button to save your selection.
(By RSA Customer Support)

-Regards,
Blackhattrick.com
(Googlethewebsite.blogspot.com/blackhattrick.blogspot.com)
RSA, The Security Division of EMC, releases Patch 7 for RSA enVision(r) 4.0 Service Pack 4. RSA, The Security Division of EMC, releases Patch 7 for RSA enVision(r) 4.0 Service Pack 4. Reviewed by BlackHat on 12:22 AM Rating: 5

LCD screen on enVision Appliance displays a message

10:44 AM
LCD screen on enVision Appliance displays a message
Fact
enVision Core 3.7.1
60 series
Symptom
"e1211 ROMB Batt" seen on LCD
Change
The appliance unit may have been turned off for a period of time, perhaps during shipment.
Cause
The battery power is low for the SCSI controller and this does not effect the operation of the system.
Fix
Follow the instructions below to recharge the battery:
1.       Power down the appliance unit and unplug the power cord.


2.       Plug the power cord back into the appliance but DO NOT switch it back on as this will charge the battery.


3.       Let the battery charge for a minimum of three hours but the preference would be to charge the battery for twenty-four hours.


4.       After charging the battery, switch the appliance unit back on and the message should clear itself.
Please contact RSA Customer Support if the problem persists.



note
Refer also to document enVision appliance RAID controller battery for adidtional information.

-Regards,
Blackhattrick blog
(Googlethewebsite.blogspot.com/blackhattrick.blogspot.com)

LCD screen on enVision Appliance displays a message LCD screen on enVision Appliance displays a message Reviewed by BlackHat on 10:44 AM Rating: 5


SastiPrice.com Store

Powered by Blogger.